Quick answer: a 30-amp RV connection and a 50-amp RV connection are different electrical systems and should be installed for the actual RV and expected use. The correct setup depends on the RV inlet, circuit requirements, panel capacity, wire route, and where the RV will park.
Why the difference matters
A common 30-amp RV connection is a 120-volt circuit designed for RV equipment using that standard. A common 50-amp RV connection uses a four-wire 120/240-volt configuration that gives a larger RV substantially more available power across its internal 120-volt loads.
They should not be treated as interchangeable versions of the same outlet. The breaker, conductors, receptacle, wiring configuration, and equipment must match the intended RV connection.
Start with the RV, not the outlet
Before installing anything, confirm what the RV actually requires. If family members visit with different RVs, think about which connection will realistically be used most often and whether an approved adapter is part of that plan.
Heritage can include RV power as part of residential electrical work in Bonaire, along with garages, shops, exterior circuits, lighting, and other property upgrades.
Panel capacity still matters
An RV circuit can be a significant load, especially when the RV is running air conditioning, water heating, cooking equipment, or other appliances. The home’s electrical service and panel should be reviewed before a new high-amperage circuit is added.
If the existing equipment is already limited by capacity or breaker space, the project may need additional planning. Heritage also provides electrical panel upgrades in Bonaire when the existing panel truly needs more capacity or better equipment.
Location affects cost and installation method
An RV parked next to the house is simpler than one parked beside a detached building or at the edge of a long driveway. Distance can affect conductor size and routing. Outdoor equipment needs to be selected and installed for the environment, and the connection should be positioned where the RV cord can reach without creating a trip hazard or relying on a chain of extension cords.
Think about how the property will use the circuit
Some homeowners want an RV connection only for visitors. Others keep their own camper at home and use the circuit for pre-trip cooling, battery charging, maintenance, or occasional overnight stays. That difference matters when deciding how much capacity is useful.
If the property also has a shop, pool, generator, or EV charger, all of those loads should be considered together rather than one project at a time.
Do not guess at RV receptacle wiring
RV receptacles can look familiar to people who have worked around dryers, ranges, or welders, but similar-looking devices do not mean the wiring is the same. Using the wrong voltage or wiring configuration can damage RV equipment.
This is one of those installations where verifying the actual connection before energizing it matters more than how simple the receptacle appears.
Bottom line
If you want a proper place for an RV to plug in at your Bonaire home, start with the RV requirements and the home’s electrical capacity. Heritage can plan the circuit, route, outdoor connection, and panel work around the way the property will actually be used. See the Bonaire electrician page for additional local services.